Sierra 3500 2WD V8-6.6L DSL Turbo VIN 2 (2004)
3. Connect the pressure balance pump electrical connector.
4. Install the front and auxiliary fuel tanks.
Fuel Hose Replacement - Fuel Injection Pump to Fuel Feed Block
FUEL HOSE REPLACEMENT - FUEL INJECTION PUMP TO FUEL FEED BLOCK
REMOVAL PROCEDURE
1. Remove the water outlet.
2. Remove the air intake tube.
3. Reposition the fuel hose clamps (1) at the return/feed line as required.
4. Disconnect the fuel hoses from the return/feed line as required.
