Sierra 3500 2WD V8-6.6L DSL Turbo VIN 2 (2004)
![background image](/gmc/sierra_3500_2wd/v8-6.6l_dsl_turbo_vin_2/Page-1617001.png)
Wheel Bearing: Service and Repair
With Full Floating 10.5" or 11.5" Ring Gear
Rear Axle Hub, Bearing, Cup, and/or Seal Replacement
^
Tools Required
-
J 8092 Universal Driver Handle - 3/4 inch - 10
-
J 2222-C Wheel Bearing Nut Wrench
-
J 24426 Wheel Bearing Race Installer - Outer
-
J 24427 Wheel Bearing Race Installer - Inner
-
J 44419 Hub Outer Bearing Race Installer
-
J 44420 Differential Bearing and Hub Seal Installer
Removal Procedure
1. Raise the vehicle. Refer to Vehicle Lifting.
2. Remove the tire and wheel assembly.
3. Remove the brake caliper.
4. Remove the axle shaft.
5. Remove the axle nut retaining ring.
6. Remove the key.
7. Remove the adjusting nut using the J 2222-C.