Sierra 3500 2WD V8-8.1L VIN G (2005)
Glove Compartment: Procedures
COMPARTMENT REPLACEMENT - INSTRUMENT PANEL (I/P)
REMOVAL PROCEDURE
1. Close the IP compartment door.
2. Drill out the 2 rivets (2).
3. Remove IP storage compartment door retaining screws (1) from the instrument panel.
4. Remove the IP compartment door.
INSTALLATION PROCEDURE
1. Install the IP compartment door.
2. Install the IP compartment retaining screws (1) to the instrument panel.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the screws to 1.9 N.m (17 lb in).
