Sierra 3500 4WD V8-6.0L (2008)
9. Install the brake booster pushrod retainer (1).
Rotate the retainer 360 degrees to ensure it is seated properly before tightening the retainer bolt.
10. Install the brake booster pushrod retainer bolt (1).
Tighten the bolt to 10 N.m (89 lb in).
11. Install the accelerator pedal position sensor assembly.
12. Connect the electrical connectors to the following components:
*
The adjustable pedals motor assembly
*
The memory sensor connector, if equipped
*
The pedal position sensor
