Sierra 3500 4WD V8-6.0L (2008)
8. Remove the accelerator actuator mounting screws (1).
9. Remove the accelerator actuator (2).
Installation Procedure
Important: Accurate measurement and adjustment during following steps is critical to ensure the proper step-over distance between the
brake and accelerator pedals.
1. Install the accelerator actuator (2) to the accelerator pedal bracket.
Notice: Refer to Fastener Notice.
2. Install the accelerator actuator screws (1).
Tighten the screws to 2.5 N.m (22 lb in).