Sierra 3500 4WD V8-6.0L (2008)
Bar and Support Assembly Replacement (Bushing Style))Torsion Bar and Support Assembly Replacement (Link Style) (See: Torsion Bar/Service
and Repair/Torsion Bar and Support Assembly Replacement (Link Style)) .
6. Install the lower ball joint in the steering knuckle.
7. Install the wheel drive shaft. Refer to Wheel Drive Shaft Replacement (2500) ()Wheel Drive Shaft Replacement (1500) () .
8. Install the lower ball joint retaining nut.
Tighten nuts to 110 N.m (81 lb ft).
9. Install the shock module. Refer to Shock Absorber Replacement (2500 Series) () .
10. Remove the support for the knuckle and upper control arm.
11. Install the stabilizer shaft links to the lower control arm. Refer to Stabilizer Shaft Replacement (2500, 3500) (See: Stabilizer Bar/Service and
Repair/Front Suspension)Stabilizer Shaft Replacement (1500) (See: Stabilizer Bar/Service and Repair/Front Suspension) .
12. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation (See: Wheels and Tires/Service and Repair) .
13. Remove the supports and lower the vehicle.
14. Align the front end. Refer to Wheel Alignment Measurement (See: Alignment/Service and Repair/Wheel Alignment Measurement) .