Sierra 3500 4WD V8-6.0L (2008)
1. Install the clutch pedal sub-assembly.
Notice: Refer to Fastener Notice .
2. Install the clutch pedal to brake module bolts.
Tighten the bolts to 50 N.m (37 lb ft).
3. Install the clutch pedal to clutch pedal bracket bolt.
Tighten the bolt to 36 N.m (27 lb ft).
4. Remove the clutch master cylinder. Refer to Clutch Master Cylinder Replacement (See: Clutch Hydraulic System/Clutch Master Cylinder/Service
and Repair) .
5. Connect the clutch pedal engine start switch electrical connector (1).
6. Install the instrument panel. Refer to Instrument Panel Service Positioning (Without SLT) Instrument Panel Service Positioning (With SLT) .