Sierra 3500 4WD V8-6.0L (2008)
5. Lubricate the following with a light coat of high melting point EP bearing lubricant:
-
The outer wheel bearing
-
The inner wheel bearing
-
The outer wheel bearing cup
-
The inner wheel bearing cup
-
The axle hub spindle
6. Install the outer bearing into the rear axle hub.
Note: Drive the outer bearing cup into the wheel hub until it is just past the retaining ring groove. Do not bottom out the bearing assembly in the
bore.
7. Using the J 44419 installer (2) and the J 8092 handle (1), install the outer bearing cup into the rear axle hub.
