gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Body - Sticking/Binding Door Mounted Seat Switches|Page 24637 > < Power Seat Motor Position Sensor|Locations|Page 24628
Page 1
background image

Power Seat Switch: Customer Interest
Body - Sticking/Binding Door Mounted Seat Switches

TECHNICAL

Bulletin No.: 09-08-50-011A

Date: April 13, 2011

Subject: Sticking/Binding Door Mounted Seat Switches (Align Switch)

Models:

2007-2012 Cadillac Escalade, Escalade ESV, Escalade EXT
2007-2012 Chevrolet Avalanche, Silverado, Suburban, Tahoe
2007-2012 GMC Sierra, Yukon, Yukon Denali, Yukon XL, Yukon XL Denali
All Equipped with RPOs AN3, KA1, KB6

Supercede:
This bulletin is being revised to add model years. Please discard Corporate Bulletin Number 09-08-50-011 (Section 08 - Body and Accessories). 

Condition

Some customers may comment that the door mounted memory/ heated/ cool seat switch buttons are sticking or binding.

Cause

This condition may be caused by the switch being out of alignment in the bezel, creating a hard contact between the switch button and the inside release
handle bezel.

Correction

1. Remove the door trim. Refer to Front Side Door Trim Panel Replacement in SI.

Body - Sticking/Binding Door Mounted Seat Switches|Page 24637 > < Power Seat Motor Position Sensor|Locations|Page 24628