Sierra 3500 4WD V8-6.6L DSL Turbo (2007)
1. Install the inlet hose washer and inlet line.
Notice: Refer to Fastener Notice.
2. Install the turbocharger coolant inlet hose banjo bolt (1).
Tighten the bolt to 25 N.m (18 lb ft).
3. Position the turbocharger coolant inlet hose clamp at the bypass valve.
4. Remove the tape from the turbocharger openings.
Important: Lubricate the end of the duct prior to installation.
5. Install the charged air cooler outlet pipe to the turbocharger and the charged air cooler.
6. Install the air cleaner.
7. Install the intake manifold cover.
8. Fill the cooling system. Refer to Cooling System Draining and Filling (Static Fill) Cooling System Draining and Filling (Vac-N-Fill).
