Sierra 3500 4WD V8-6.6L DSL Turbo (2007)
Notice: Refer to Fastener Notice.
2. If necessary, install the coolant outlet pipe clip bolt (3) to the turbocharger.
Tighten the bolt to 9 N.m (80 lb in).
3. If necessary, install the turbocharger. Refer to Turbocharger Replacement.
4. Install the turbocharger coolant outlet pipe bolt and nut.
Tighten the bolt/nut to 9 N.m (80 lb in).
5. Install the turbocharger coolant outlet hose to the pipe on the turbocharger.
6. Position the turbocharger coolant outlet hose clamp.