Sierra 3500 4WD V8-6.6L DSL Turbo (2007)
6. Remove the crankshaft balancer bolt.
7. Remove the crankshaft balancer.
8. If required, clean and inspect the crankshaft balancer. Refer to Crankshaft Balancer Cleaning and Inspection.
Installation Procedure
1. Lubricate the crankshaft balancer internal hub with clean engine oil.
2. Install the crankshaft balancer on the crankshaft.
3. Lubricate the crankshaft balancer bolt with clean engine oil.
Notice: Refer to Fastener Notice.
4. Install the crankshaft balancer bolt and washer.
Tighten the bolt to 353 N.m (260 lb ft).
