Sierra 3500 4WD V8-6.6L DSL Turbo (2007)
Important: When raising the engine only raise enough to separate the engine mount from the engine mount bracket. Raising any further
will require removal of the fan shroud or the exhaust pipe.
7. If RWD vehicle, using a suitable jack on the ground wire bolt bosses, raise the engine.
Only raise the engine enough to separate the engine mount to engine mount bracket.
8. If 4WD vehicle, attach a chain to the front of the engine. Use accessible mounting bolts for the generator mounting bracket and the power steering
pump mounting bracket.
9. Raise the engine with a suitable lifting device to remove the engine mount.
Only raise the engine enough to separate the engine mount to engine mount bracket.
10. Remove the bolts holding the engine mount to the engine.