Sierra 3500 4WD V8-6.6L DSL Turbo (2007)
Important: Prior to tightening the turbocharger exhaust clamp, ensure that the turbocharger exhaust pipe is inserted into the clamp.
6. Tighten the turbocharger exhaust pipe to turbocharger clamp bolt (1).
Tighten the bolt to 15 N.m (11 lb ft).
7. Install the catalytic converter.
8. Tighten the turbocharger exhaust pipe to bracket bolt.
Tighten the bolt to 34 N.m (25 lb ft).
9. Install the turbocharger upper heat shield and bolts.
Tighten the bolts to 10 N.m (89 lb in).
10. Install the EGR valve cooler
11. Install the glow plug control module.
