Sierra 3500 4WD V8-6.6L DSL Turbo (2007)
8. Install the retainer securing the cable to the steering column.
9. Position the carpet and insulation around the driver's area.
10. Install the drivers seat.
11. Install the instrument panel knee bolster.
12. Raise and support the vehicle. Refer to Vehicle Lifting.
13. Align and install the cable to the bracket.
14. Install the range selector cable end (2) to the transmission range selector lever ball stud (1).
15. Install the cable clip on the transfer case, if equipped.
16. Install the retainer that secures the cable to the bracket.
