Sierra 3500 4WD V8-6.6L DSL Turbo (2007)
Flex Plate: Service and Repair
Engine Flexplate/Flywheel Replacement
Engine Flywheel Replacement
Tools Required
*
J 44643 Flywheel Holding Tool
*
J 45059 Angle Meter
Removal Procedure
1. Remove the transmission.
2. Install J 44643 in order to hold the flywheel.
Caution: When removing, handling or installing this component wear protective gloves. The sharp edges on the component may be very
sharp and may cause injury.
3. Remove and discard the flywheel bolts.
4. Remove the flywheel washer and flywheel.
Installation Procedure
Caution: When removing, handling or installing this component wear protective gloves. The sharp edges on the component may be very sharp
and may cause injury.
