Sierra 3500 4WD V8-6.6L DSL Turbo VIN 2 (2004)
19. Position the power steering pump bracket.
20. Install the power steering pump bracket bolts.
Tighten the bolt to 46 Nm (34 ft. lbs.).
21. Position the generator positive cable and the junction block bracket.
22. Install the battery positive cable junction block to power steering pump bolt (1).
Tighten the bolt to 9 Nm (80 inch lbs.).
23. Install the clip holding the positive cable to the engine front cover.
24. Install the positive cable to the generator.
25. Install the generator positive cable to generator nut.
Tighten the nut to 9 Nm (80 inch lbs.).
