Sierra 3500 4WD V8-6.6L DSL Turbo VIN 2 (2004)
14. Remove the bolts holding the engine mount to the engine.
15. Remove the 2 through-bolts for the engine mount frame bracket.
16. Remove the engine mount frame bracket.
17. Remove the engine mount.
Installation Procedure
1. Position the engine mount frame bracket on the frame. Do not install the bolts.
2. Install the engine mount.
3. Notice: Refer to Fastener Notice in Service Precautions.
Install the 2 through-bolts.
Tighten the through-bolts to 75 Nm (55 ft. lbs.).