Sierra 3500 4WD V8-6.6L DSL Turbo VIN 2 (2004)
1. Install the water-in-fuel sensor to the NEW fuel filter.
IMPORTANT: Inspect the fuel heater element housing for contamination. Contamination on the fuel heater element housing may cause leakage at
the fuel filter. Coat the fuel filter seal with clean engine oil.
2. Screw on the NEW fuel filter to the fuel filter adapter.
3. Connect the fuel filter connectors.
4. Install the fuel hoses.
5. Position the fuel hose clamps.
6. Prime the fuel system. Refer to Fuel System Priming.
7. Start the engine. If the engine stalls, repeat the above step.
8. Once the engine starts, inspect for fuel leaks.