Sierra 3500 4WD V8-6.6L DSL Turbo VIN 2 (2004)
Tighten
Tighten the bolts to 25 N.m (18 lb ft).
5. Install the EGR coolant pipe hose.
6. Position the EGR coolant pipe hose clamp.
7. Lubricate a NEW washer with diesel fuel.
8. Install the fuel injection control module upper banjo bolt and the NEW washer.
Tighten
Tighten the bolt to 34 N.m (25 lb ft).
9. Connect the fuel feed line quick connect fitting.
10. Install the water outlet tube.
11. Prime the fuel system. Refer to Fuel System Priming.
12. Start the engine. If the engine stalls, repeat the above step.
13. Once the engine starts, inspect for fuel leaks.
