Sierra 3500 4WD V8-6.6L DSL Turbo VIN 2 (2004)
5. Remove the camshaft reluctor screws.
6. Remove the camshaft reluctor.
7. Clean and Inspect the camshaft reluctor for damage. Replace the reluctor if damage is found.
Installation Procedure
1. Position the camshaft reluctor to the camshaft gear.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the camshaft reluctor bolts.
Tighten the bolts to 9 Nm (80 inch lbs.).