Sierra 3500 4WD V8-6.6L DSL Turbo VIN 2 (2004)
8. Using the J 44663 (2) , remove the upper ball joint stud from the steering knuckle.
9. Remove the upper ball joint (1) from the vehicle.
Installation Procedure
1. Install the upper ball joint (1) to the steering knuckle.
2. Notice:
Refer to Fastener Notice in Service Precautions.
Install the upper ball joint retaining bolts (2) and stud (1).
^
Tighten the bolts to 110 Nm (81 ft. lbs.).
