Sierra 3500 4WD V8-6.6L DSL Turbo VIN 2 (2004)
Constant Velocity Joint: Service and Repair
Inner Joint and Seal Replacement
Wheel Drive Shaft Inner Joint and Seal Replacement
^
Tools Required
-
J 35910 Seal Clamp Tool
-
J 36652 Drive Axle Clamp Swage Tool
-
J 36652-98 Axle Swage Tool
Disassembly Procedure
1. Use a hand grinder in order to cut through the swage ring (2).
Important:
Use caution when using the hand grinder by the tripot housing (1).
2. Remove the tripot housing (1) from the halfshaft.
3. Wipe the grease off of the housing (1).
4. Thoroughly degrease the tripot housing (1).
5. Allow the tripot housing (1) to dry prior to assembly.
