Sierra 3500 4WD V8-6.6L DSL Turbo VIN 2 (2004)
Installation Procedure
Caution: When removing, handling or installing this component wear protective gloves. The sharp edges on the component may be very
sharp and may cause injury.
1. Important: When installing the flywheel, ensure that the tapered side of the teeth are facing the starter.
Install the flywheel.
2. Install the flywheel washer with the beveled side facing the engine.
Notice: Refer to Fastener Notice in Service Precautions.
3. Notice: This component uses bolts with a preapplied molybdenum disulfide coating for thread lubrication. Do not remove the coating or use any
additional lubricant. Improperly lubricated threads will adversely affect the bolt torque and clamp load. Improper bolt torque and clamp load can
lead to engine damage.
Install NEW flywheel bolts.