Sierra 3500 4WD V8-8.1L VIN G (2006)
6. Adjust the park brake.
w/Rear Disc
Park Brake Cable Replacement - Left Rear (w/Rear Disc)
Removal Procedure
1. Release the park brake.
2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
3. For all 15 series vehicles, relieve the tension from the park brake cable by pulling down on the park brake cable in front of the equalizer and
removing the left park brake cable from the equalizer bar.
4. For 25/35 series vehicles, disable the park brake cable automatic adjuster. Refer to Disabling the Park Brake Cable Automatic Adjuster (w/Rear
Disc).
5. For 25/35 series vehicles, disconnect the cable at the equalizer.