Sierra 3500 4WD V8-8.1L VIN G (2006)
7. Install the J 38416-B (2) onto the J 42846 (1) in order to remove the crankshaft balancer. Place the legs of the J 38416-B into the recesses cast into
the backside of the balancer inner hub.
8. Tighten the center screw of the J 38416-B until the crankshaft balancer is clear of the crankshaft nose.
9. Remove the crankshaft balancer.
10. Remove the J 42846 from the end of the crankshaft.
Installation Procedure
Important:
^
The balancer should be positioned onto the end of the crankshaft as straight as possible prior to tool installation.
^
Apply grease or clean engine oil to the inside of the crankshaft balancer or the end of the crankshaft, to prevent galling during assembly.
