gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Fuel Pump Relay > < Fuel Pressure Gage Installation and Removal|Page 8622
Page 3
background image

Step 5 - Step 13

The numbers below refer to the numbers on the diagnostic table.
2. This step verifies that the fuel pump is operating.
4. This step tests for an internal fuel leak. If the fuel pressure drops during this test, then an internal loss of pressure is indicated.
7. This step tests for a loss of fuel pressure between the fuel feed pipe shut-off adapter and the fuel pump.

10. This step verifies that a circuit condition is not the cause of a fuel pressure concern. Inspect all fuel pump electrical circuits thoroughly.
11. This step tests for a leaking fuel injector, or fuel pressure regulator. If the fuel pressure remains constant during this test, the fuel injectors are not

leaking fuel.

Fuel Pump Relay > < Fuel Pressure Gage Installation and Removal|Page 8622