Sierra 3500 4WD V8-8.1L VIN G (2006)
1. Install the left rear speed sensor.
^
Tighten the speed sensor to 15 Nm (11 ft. lbs.).
Notice: Refer to Fastener Notice in Service Precautions.
2. Connect the left rear speed sensor electrical connector (4)
3. Lower the vehicle.
Transfer Case Speed Sensor Replacement - Right Rear
Transfer Case Speed Sensor Replacement - Right Rear
Removal Procedure
1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Disconnect the right rear speed sensor electrical connector (3).
