Sierra 3500 4WD V8-8.1L VIN G (2006)
2. Install the power steering cooler outlet hose (2) to the power steering pump (1).
3. Install the retaining clamp.
4. Install the power steering inlet hose (3) to the power steering gear (1).
5. Install the retaining clamp.
6. Fill and bleed the power steering system.
7. Inspect all the hose connections for leaks.
8. Install the front grille.
9. Connect the energy storage box after servicing the vehicle.
Power Steering Hose Assembly Replacement (Non Rack and Pinion)
Power Steering Hose Assembly Replacement (Non Rack and Pinion)
Removal Procedure
1. Disconnect the energy storage box before serving the vehicle.
2. Install a drain pan under the vehicle.
Notice: Refer to Power Steering Hose Disconnected Notice in Service Precautions.
3. Remove the power steering gear inlet hose (4) from the brake booster.
4. Remove the power brake booster outlet hose (3) retaining clamp (2) to remove the power brake booster hose outlet hose from the brake booster.
5. Remove the power brake booster inlet hose (1) from the brake booster.
