Sierra 3500 4WD V8-8.1L VIN G (2006)
1. Remove the power steering inlet hose (2) from the power steering pump (1).
2. Remove the power steering inlet hose (2) from the power steering gear (3).
Installation Procedure
1. Connect the power steering inlet hose (2) to the power steering gear (3).
2. Connect the power steering inlet hose (2) to the power steering pump (1).
^
Tighten the hose connections to 28 Nm (20 ft. lbs.)
Notice: Refer to Fastener Notice in Service Precautions.
3. Bleed the power steering system.
4. Inspect all the hose connections for leaks.
Power Steering Gear Outlet Pipe/Hose Replacement (Recirculating Ball)
Power Steering Gear Outlet Pipe/Hose Replacement (Recirculating Ball)
Removal Procedure
1. Install a drain pan under the vehicle.
Notice: Refer to Power Steering Hose Disconnected Notice in Service Precautions.
2. Remove the power steering gear outlet hose (3) from the steering gear (2).
3. Remove the clamp retaining the power steering gear outlet hose (3) to the power steering pump (1). Remove the power steering gear outlet hose
from the power steering pump.
