Sierra 3500 4WD V8-8.1L VIN G (2006)
2.
Install the upper control arm bolts (4) for the 25/35 Series 4WD.
Note:
Refer to Fastener Notice in Cautions and Notices.
3.
Install the upper control arm nuts and the adjustment cams (2) 25/35 Series 4WD.
Tighten
Tighten the nuts to 190 N.m (140 lb ft).
4.
Install the upper control arm bolts (4) for the 15 Series 2WD, 4WD, and 25/35 Series 2WD.
5.
Install the upper control arm nuts and the adjustment cams (2) for the 15 Series 2WD, 4WD, and 25/35 Series 2WD.
Tighten
Tighten the nuts to 190 N.m (140 lb ft).
6.
Connect the upper control arm to the steering knuckle.
