Sierra 3500 Denali 2WD V8-6.0L (2011)
Sunroof / Moonroof Panel: Service and Repair
Sunroof Window Replacement (Crew Cab)
Sunroof Window Replacement (Crew Cab)
Removal Procedure
Note: The sunroof must be in the fully closed position prior to removing the sunroof window.
1. Open the sunshade panel.
2. Remove the 4 screws (2) that retain the sunroof window (1) to the sunroof module assembly.
3. Remove the sunroof window from the top of the vehicle.
Installation Procedure
1. Position the sunroof window (1) to the vehicle.
2. Loosely insert the screws (2) that retain the sunroof window (1) to the sunroof module assembly.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Adjust the sunroof window panel as necessary. Refer to Sunroof Window Height and Opening Fit Adjustment (Crew Cab) (See:
Adjustments/Sunroof Window Height and Opening Fit Adjustment (Crew Cab))Sunroof Window Height and Opening Fit Adjustment (Extended
Cab) (See: Adjustments/Sunroof Window Height and Opening Fit Adjustment (Extended Cab)).
Tighten the screws to 3 Nm (27 lb in).
