Sierra 3500 Denali 2WD V8-6.0L (2011)
9. Install new disc brake pad springs (1).
10. Install the inner (1) and outer (2) disc brake pads.
11. Prepare the brake caliper bracket bolts and the rear axle threaded holes for assembly.
*
Thoroughly clean the brake caliper bracket bolts of any threadlocker residue.
*
Thoroughly clean the rear axle threaded holes of any threadlocker residue with denatured alcohol and allow to dry.
12. Apply threadlocker GM P/N 89021297 (Canadian P/N 10953488) to 2/3 of the threaded length of the brake caliper bracket bolt.
13. Allow the threadlocker to cure approximately 10 minutes before assembly.
14. Install the brake caliper and bracket assembly to the rear axle.
