Sierra 3500 Denali 2WD V8-6.0L (2011)
9. Install the left side instrument panel electrical center/junction block. Refer to Instrument Panel Electrical Center or Junction Block Replacement -
Left Side (See: Maintenance/Fuses and Circuit Breakers/Fuse Block/Service and Repair/Removal and Replacement/Instrument Panel Electrical
Center or Junction Block Replacement - Left Side).
10. Install the left side body hinge pillar trim panel. Refer to Body Hinge Pillar Trim Panel Replacement (See: Body and Frame/Interior Moulding /
Trim/Trim Panel/Service and Repair/Body Hinge Pillar Trim Panel Replacement).
11. Raise and support the vehicle.
12. Install the front park brake cable to the frame.
13. Ensure the front park brake cable conduit (1) locking tabs are fully engaged in the frame.
14. Connect the front park brake cable (1) to the intermediate cable connector.
15. Lower the vehicle.
16. Enable the parking brake cable adjuster, if equipped. Refer to Parking Brake Cable Adjuster Enabling (See: Parking Brake Cable/Service and
Repair/Procedures/Parking Brake Cable Adjuster Enabling).
17. Adjust the park brake. Refer to Parking Brake Adjustment (1500 Drum Brake) (See: Adjustments/Parking Brake Adjustment (1500 Drum Brake)
)Parking Brake Adjustment (1500 Disc Brake) (See: Adjustments/Parking Brake Adjustment (1500 Disc Brake))Parking Brake Adjustment
(2500/3500 SRW) (See: Adjustments/Parking Brake Adjustment (2500/3500 SRW))Parking Brake Adjustment (3500 DRW) (See: