Sierra 3500 Denali 2WD V8-6.0L (2011)
2. Install the blower motor to the heater/ventilation module. Turn the blower assembly clockwise until the retaining tab locks into place.
3. Install the blower motor insulating cover.
4. Connect the electrical connector to the blower motor.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
5. Install the blower motor insulating cover screws and tighten to 1.6 Nm (14 lb in).
6. If equipped, install the sound insulator panel. Refer to Instrument Panel Insulator Replacement (With RPO SLT) (See: Body and Frame/Interior
Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Instrument Panel Insulator Replacement (With RPO SLT))Instrument Panel
Insulator Replacement (Without RPO SLT) (See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Instrument Panel Insulator Replacement (Without RPO SLT)).
