Sierra 3500 Denali 2WD V8-6.0L (2011)
4. Install the fuel/EVAP line bracket bolt (1).
Tighten the bolt to 9 Nm (80 lb in).
5. Install the fuel/EVAP line clip nut (2).
Tighten the bolt to 20 Nm (15 lb ft).
6. Remove the caps from the fuel and EVAP lines.
7. Connect the fuel tank EVAP line quick connect fitting to the chassis line. Refer to Plastic Collar Quick Connect Fitting Service (See: Fuel Line
Coupler/Service and Repair/Plastic Collar Quick Connect Fitting Service).
8. Connect the fuel tank fuel feed line quick connect fitting to the chassis line. Refer to Plastic Collar Quick Connect Fitting Service (See: Fuel Line
Coupler/Service and Repair/Plastic Collar Quick Connect Fitting Service).
9. Unscure and position the EVAP canister vent solenoid clip (1) to the chassis EVAP line.
10. Install the EVAP canister vent solenoid pipe clip (2) to the chassis EVAP line.