Sierra 3500 Denali 2WD V8-6.0L (2011)
5. Reposition the generator battery jumper cable boot (3).
6. Remove the generator battery jumper cable nut (2) from the generator.
7. Remove the generator battery jumper cable terminal (1) from the generator stud.
8. Remove the generator bolts.
9. Remove the generator.
Installation Procedure
1. Install the generator.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the generator bolts.
Tighten the bolts to 55 Nm (41 lb ft).