Sierra 3500 Denali 2WD V8-6.0L (2011)
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Install the steering shaft coupling nut (1) and the bolt (2) to the upper intermediate steering shaft and tighten to 50 Nm (37 lb ft).
4. Install the steering shaft coupling bolt (2) to the steering gear and tighten to 47 Nm (35 lb ft).
5. Install the engine shield. Refer to Engine Shield Replacement (See: Body and Frame/Frame/Skid Plate/Service and Repair/Engine Shield
Replacement).
