Sierra 3500 Denali 2WD V8-6.0L (2011)
Clutch Slave Cylinder: Service and Repair
Clutch Actuator Cylinder Replacement (TZ0)
Clutch Actuator Cylinder Replacement (TZ0)
Removal Procedure
1. Disconnect the clutch pedal position switch electrical connector (1).
2. Push the clutch pedal in and squeeze the pushrod bushing tabs in, in order to release the pushrod bushing from the clutch pedal.
3. Disconnect the clutch actuator cylinder to clutch master cylinder quick connect fitting.
4. Remove the clutch master cylinder clip from the brake pressure module valve pipe.
5. Rotate the clutch master cylinder 45 degrees clockwise to the unlocked position.
