Sierra 3500 Denali 2WD V8-6.0L (2011)
3. Using the J 37624 - installer (2) and the J 8092 - driver (1), install the inner pinion bearing cup in the pinion gear bearing retainer.
4. Using the J 8608 - installer (2) and the J 8092 - driver (1), install the outer pinion bearing cup in the pinion gear bearing retainer.
Note: Press the bearing on until the cone seats on the pinion.
5. Using the J 24433 - installer and a hydraulic press, install the inner pinion bearing.
6. Install the new collapsible spacer.
7. Lubricate the pinion bearings with axle lubricant. Refer to Fluid and Lubricant Recommendations (See: Maintenance).
8. Install the outer pinion bearing into the pinion bearing retainer.
9. Using the J 44414 - installer , install the new pinion oil seal.