Sierra 3500 Denali 2WD V8-6.0L (2011)
Constant Velocity Joint: Service and Repair
Wheel Drive Shaft Inner Joint and Boot Replacement
Wheel Drive Shaft Inner Joint and Boot Replacement
Special Tools
*
J-35910 - Drive Axle Seal Clamp Pliers
*
J-36652-1 - Drive Axle Clamp Swage Tool
*
J-36652-98 - Axle Swage Tool
Disassemble Procedure
1. Remove the wheel drive shaft. Refer to Wheel Drive Shaft Replacement (1500) (See: Service and Repair/Wheel Drive Shaft Replacement (1500)
)Wheel Drive Shaft Replacement (2500/3500) (See: Service and Repair/Wheel Drive Shaft Replacement (2500/3500)).
Note: Use caution when removing the tripot housing (1).
2. Using the appropriate tool, remove the boot clamp (2).
3. Remove the tripot housing (1).
Note: If using denatured alcohol or any other recommend cleaning solvent, allow the tripot housing to air dry.
4. Remove any grease from of the housing (1).
