Sierra 3500 Denali 4WD V8-6.0L (2011)
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the adjustable pedal position sensor bolts (1) and tighten to 2 Nm (18 lb in).
3. Connect the adjustable pedal position sensor jumper harness electrical connector (1).
4. Install the driver knee bolster. Refer to Knee Bolster Replacement (With RPO SLT) (See: Restraint Systems/Knee Diverter/Service and
Repair/Knee Bolster Replacement (With RPO SLT))Knee Bolster Replacement (Without RPO SLT) (See: Restraint Systems/Knee
Diverter/Service and Repair/Knee Bolster Replacement (Without RPO SLT)).
