Sierra 3500 Denali 4WD V8-6.0L (2011)
10. Connect the master cylinder primary brake pipe fitting (1) and tighten the fitting to 32 Nm (24 lb ft).
11. Connect the master cylinder secondary brake pipe fitting (2) and tighten the fitting to 32 Nm (24 lb ft).
12. Connect the EBCM electrical connector.
13. Bleed the antilock brake system.
14. Program the EBCM and calibrate the brake pressure sensor. Refer to Electronic Brake Control Module Programming and Setup (See: Testing
and Inspection/Programming and Relearning/Electronic Brake Control Module Programming and Setup).
