Sierra 3500 Denali 4WD V8-6.0L (2011)
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
12. Install the brake caliper bracket bolts (1) and tighten to 300 Nm (221 lb ft).
13. Assemble the brake hose fitting bolt (1) and 2 new brake hose fitting gaskets (2) to the brake hose fitting (3).
14. Install the brake hose assembly to the caliper inlet and tighten the brake hose fitting bolt to 40 Nm (30 lb ft).
15. Bleed the hydraulic brake system. Refer to Hydraulic Brake System Bleeding (Manual) (See: Brake Bleeding/Service and Repair)Hydraulic
Brake System Bleeding (Pressure) (See: Brake Bleeding/Service and Repair)Hydraulic Brake System Bleeding (Two-mode Hybrid) (See: Brake
Bleeding/Service and Repair).
16. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and Repair).
Rear Brake Caliper Replacement (J95)
Rear Brake Caliper Replacement (J95)
Removal Procedure