Sierra 3500 Denali 4WD V8-6.0L (2011)
7. Install the piston dust boot (2) over the end of the piston (3) so that the fold will face toward the brake caliper housing piston bore opening.
8. Seat the caliper dust boot into the brake caliper bore groove (1) and slide the piston into the brake caliper bore.
9. Using your fingers, carefully push the piston to the bottom of the brake caliper bore.
10. Ensure the caliper dust boot is properly seated into the piston groove and into the groove in the brake caliper bore.
11. Repeat steps 4 - 10 for the remaining piston.
12. Install the brake caliper to the vehicle. Refer to Front Brake Caliper Replacement (JD9, JF3, JF7, JG4) (See: Removal and Replacement/Front
Brake Caliper Replacement (JD9, JF3, JF7, JG4))Front Brake Caliper Replacement (J90, J95, J96) (See: Removal and Replacement/Front Brake
Caliper Replacement (J90, J95, J96)).
Front Brake Caliper Overhaul (J90, J95, J96)
Front Brake Caliper Overhaul (J90, J95, J96)
Disassembly Procedure
Warning: Refer to Brake Dust Warning (See: Service Precautions/Technician Safety Information/Brake Dust Warning).
