Sierra 3500 Denali 4WD V8-6.0L (2011)
4. Lubricate the master cylinder reservoir-to-master cylinder barrels with GM approved brake fluid from a clean, sealed brake fluid container.
5. Carefully press the master cylinder reservoir (1) straight downward and install the reservoir to the master cylinder.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
6. Install the master cylinder reservoir bolts (1) and tighten to 8 Nm (71 lb in).
7. Connect the brake fluid level indicator switch electrical connector.
8. Fill the master cylinder reservoir. Refer to Master Cylinder Reservoir Filling (Non-Hybrid) (See: Brake Master Cylinder/Service and
Repair/Removal and Replacement)Master Cylinder Reservoir Filling (Two-mode Hybrid) (See: Brake Master Cylinder/Service and
Repair/Removal and Replacement).