Sierra 3500 Denali 4WD V8-6.0L (2011)
5. Install the brake hose bracket bolt (1) and tighten to 25 Nm (18 lb ft).
6. Connect the front rear brake pipe fitting (1) and tighten to 25 Nm (18 lb ft).
7. Bleed the hydraulic brake system. Refer to Hydraulic Brake System Bleeding (Manual) (See: Brake Bleeding/Service and Repair)Hydraulic
Brake System Bleeding (Pressure) (See: Brake Bleeding/Service and Repair)Hydraulic Brake System Bleeding (Two-mode Hybrid) (See: Brake
Bleeding/Service and Repair).
Rear Brake Hose Replacement (To Axle - J95, J96 With JL4)
Rear Brake Hose Replacement (To Axle - J95, J96 with JL4)
Removal Procedure
Warning: Refer to Brake Fluid Irritant Warning (See: Service Precautions/Technician Safety Information/Brake Fluid Irritant Warning).
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
