Sierra 3500 Denali 4WD V8-6.0L (2011)
Parking Brake Cable: Removal and Replacement
Parking Brake Intermediate Cable Replacement (JD9, JF3, JF7, JG4)
Parking Brake Intermediate Cable Replacement (JD9, JF3, JF7, JG4)
Removal Procedure
1. Release the park brake.
2. Disable the park brake cable automatic adjuster. Refer to Parking Brake Cable Adjuster Disabling (See: Procedures/Parking Brake Cable
Adjuster Disabling).
3. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
4. Drill a 3 mm (1/8 in) hole through the dimple in the intermediate cable connector, near the front park brake cable.
5. Disconnect the intermediate cable connector (1) from the front park brake cable (2).
