Sierra 3500 Denali 4WD V8-6.0L (2011)
8. Release the park brake cable from the rear axle bracket by compressing the locking tabs and pulling the park brake cable conduit (1) rearward.
9. Disconnect the park brake cable eye (2) from the park brake actuator lever.
10. Remove the park brake cable assembly from the vehicle.
Installation Procedure
1. Connect the right park brake cable eye (2) to the park brake actuator lever.
2. Install the park brake cable to the rear axle bracket by pulling the cable conduit (1) rearward and inserting the cable conduit into the rear axle
bracket.
Ensure the locking tabs on the cable conduit are fully engaged into the rear axle bracket.
