gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Procedures|Page 6748 > < Procedures|Page 6746
Page 29
background image

Adjustments/Parking Brake Adjustment (3500 DRW)).

Parking Brake Rear Cable Replacement - Right Side (J95, J96 Pickup)

Parking Brake Rear Cable Replacement - Right Side (J95, J96 Pickup)

Removal Procedure

1. Release the park brake.
2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle   (See: Maintenance/Vehicle Lifting/Service and Repair).

3. Drill a 3 mm (1/8 in) hole through the dimple in the right parking brake cable connector (1) where the front parking brake cable is connected.
4. Pull the parking brake equalizer forward and disconnect the right parking brake cable connector from the intermediate parking brake cable.
5. Compress the locking tabs on the right parking brake cable conduit (2) and remove the parking brake cable from the equalizer.

6. Pull the parking brake cable (1) through the parking brake cable guide on the spring perch.

Procedures|Page 6748 > < Procedures|Page 6746